Appendix A Safety Information; Electrostatic Discharge (Esd) - Adaptec Serial Attached SCSI (SAS) Expander Card Installation And User Manual

A Safety Information
To ensure your personal safety and the safety of your equipment:
• Keep your work area and the computer clean and clear of debris.
• Before opening the system cabinet, unplug the power cord.

Electrostatic Discharge (ESD)

Caution: ESD can damage electronic components when they are improperly handled,
and can result in total or intermittent failures. Always follow ESD-prevention procedures
when removing and replacing components.
To prevent ESD damage:
• Use an ESD wrist or ankle strap and ensure that it makes skin contact. Connect the equipment end
of the strap to an unpainted metal surface on the chassis.
• Avoid touching the expander against your clothing. The wrist strap protects components from ESD
on the body only.
• Handle the expander by its bracket or edges only. Avoid touching the printed circuit board or the
connectors.
• Put the expander down only on an anti-static surface such as the bag supplied in your kit.
• If you are returning the expander to Adaptec by PMC Product Support, put it back in its anti-static
bag immediately.
If a wrist strap is not available, ground yourself by touching the metal chassis before handling the
expander or any other part of the computer.
Proprietary and Confidential to PMC-Sierra, Inc.
Document No.: CDP-00301-01-A Rev A, Issue
Serial Attached SCSI (SAS) Expander Card Installation and User's Guide
23