Using The Tools - Kenwood Cooking Chef Major Quick Start Manual

Using the tools:

For best performance the Power Whisk, K Beater and Stirring Tool should be almost touching the
bottom of the bowl. If necessary the tools can be adjusted. Simply use the spanner provided to adjust
the height of the tool.
Note: The tools need to sit roughly 5mm's above the bottom of the bowl, ensure that the tools are not
lowered too much as they may scratch the bottom of the bowl.
1
1
Stirring Tool: The Stirring Tool fits onto the machine in a slightly different way compared to the other
tools. Simply line up the slot on the rim of the tool with the metal pin on the underside of the mixer head.
Then, holding the centre paddle of the tool, push the tool into the socket and twist to lock into position.
1
2
2
2
3
Tip: By using a sheet of paper
you can ensure your whisk is at
the right height.
Place a sheet paper in between
the whisk and bowl. You should
be able to pull the sheet of
paper out with out tearing it.
So the bowl tool sits just above
the bottom of the bowl (but not
touching the bottom).
En
9