Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Silicon Graphics 750
Summary of Contents for Silicon Graphics 750
- Page 1 Silicon Graphics ™ 750 Quick Start Guide 007-4388-001...
- Page 2 COPYRIGHT © 2001 Silicon Graphics, Inc. All rights reserved; provided portions may be copyright in third parties, as indicated elsewhere herein. No permission is granted to copy, distribute, or create derivative works from the contents of this electronic documentation in any manner, in whole or in part, without the prior written permission of Silicon Graphics, Inc.
- Page 3 Record of Revision Version Description June, 2001 Initial revision 007-4388-001...
-
Page 5: Table Of Contents
Contents Unpacking and Inspecting the System . Physical Specifications Power Consumption . Choosing a Site. Connecting External Devices . Using Chassis Front Controls and Indicators . Starting the System Power-on Problems 007-4388-001... - Page 7 “Starting the System” on page 9 • “Power-on Problems” on page 9 See the Silicon Graphics 750 User’s Guide (SGI part number 007-4291-xxx) for more detailed information, including additional configuration information, BIOS settings, and troubleshooting information. To obtain SGI documentation using the World Wide Web, see the SGI Technical Publications Library at http://techpubs.sgi.com.
-
Page 8: Unpacking And Inspecting The System
Silicon Graphics 750 Quick Start Guide Unpacking and Inspecting the System Remove the Silicon Graphics 750 system from the packaging container and check that the following items are included: • Silicon Graphics 750 system • Silicon Graphics 750 Quick Start Guide (this document) •... -
Page 9: Power Consumption
3 to 200 Hz, 1.15 G rms Power Consumption The Silicon Graphics 750 power supply is rated for a maximum input AC power consumption of 800 watts (7.5 amps at 100 Volts, 3.75 amps at 220 volts). A fully loaded Silicon Graphics 750 system has a maximum input AC power consumption of 500 watts (510 volt-amps, 4.6 amps at 110 Volts, 2.3 amps at 220 volts). -
Page 10: Choosing A Site
Silicon Graphics 750 Quick Start Guide Choosing a Site The Silicon Graphics 750 operates reliably within normal office environments. Select a site that meets these criteria: • Near a properly earthed, grounded, three-pronged power outlet, as follows: – In the U.S. and Canada: a NEMA 5-15R outlet for 100-120 V or a NEMA 6-15R outlet for 200-240 V. -
Page 11: Connecting External Devices
Silicon Graphics 750 Quick Start Guide Connecting External Devices Connect the monitor, keyboard, mouse, and other external devices to their appropriate ports, as illustrated in Figure 1 and described in Table 2. Figure 1 Rear Panel I/O Ports and Features... - Page 12 Disk adapter: QLogic 12160 PCI SCSI HBA (LVD 160 MB/s (Ultra3) or SE Fast-20) Video output Note: The Silicon Graphics 750 system has a QLogic 12160 SCSI Host Bus Adapter installed with two external SCSI connectors accessible from the system rear panel. The components in Figure 1 are for illustration purposes only.
-
Page 13: Using Chassis Front Controls And Indicators
Silicon Graphics 750 Quick Start Guide Using Chassis Front Controls and Indicators Figure 2 shows the locations of the front controls and indicators. Figure 2 Front Controls and Indicators 007-4388-001... - Page 14 Silicon Graphics 750 Quick Start Guide Table 3 describes the front controls and indicators that are shown in Figure 2. Table 3 Front Controls and Indicators Number Item Power switch Power LED Hard drive activity LED LAN LED USB ports (2)
-
Page 15: Starting The System
Silicon Graphics 750 Quick Start Guide Starting the System After making sure that you have set up the system properly and connected all the required cables, you may now power on the system by pressing the power button. The system starts and displays a welcome message. After that, a series of power-on self-test (POST) messages appear.
Need help?
Do you have a question about the 750 and is the answer not in the manual?
Questions and answers