Technical Data - Husqvarna 436 Li Operator's Manual

Technical data

Motor
Type
Features
Low energy mode
Lubrication system
Type of oil pump
Oil tank capacity, litre
Weight
Chain saw without battery, bar and chain, empty chain oil tank, kg 2,5
Noise emissions (see note 1)
Sound power level, measured dB (A)
Sound power level, guaranteed L
Sound levels (see note 2)
Equivalent sound pressure level at the operator's ear, dB(A)
Vibration levels (see note 3)
2
Front handle, m/s
2
Rear handle, m/s
Equivalent vibration levels (see note 4)
2
Front handle, m/s
2
Rear handle, m/s
Chain/bar
Recommended bar lengths, inch/cm
Usable cutting length, inch/cm
Type of drive sprocket/number of teeth
Maximum chain speed / (savE), m/s
Approved batteries for the chain saw models above Approved batteries for the chain saw models above Approved batteries for the chain saw models above
Battery
Type
Battery capacity, Ah
Voltage, V
Weight, kg
Approved chargers for the specified batteries, BLi.
Battery charger
Mains Voltage, V
Frequency, Hz
Power,W
Note 1: Noise emissions in the environment measured as sound power (L
EC.
Note 2: Equivalent sound pressure level, according to ISO 22868, is calculated as the time-weighted energy total for
different sound pressure levels under various working conditions. Typical statistical dispersion for equivalent sound
pressure level is a standard deviation of 1 dB (A).
Note 3: Vibration level, according to EN 60745-2-13. Reported data for vibration level has a typical statistical dispersion
(standard deviation) of 1 m/s
and recommended chain type. If the machine is fitted with a different bar length, the vibration level may vary by max ±
2
1.5 m/s .
Note 4: Equivalent vibration level is measured and calculated as for combustion engine powered chainsaws. These
figures are quoted to be able to compare vibration data regardless of type of engine.
40 – English
TECHNICAL DATA
dB (A)
WA
BLi110 BLi110 BLi110
Lithium-Ion
3.0
36
1,2
QC120 QC330
220-240 100-240
50-60 50-60
125 330
2
. Declared vibration data from measurements when the machine is fitted with a bar length
436 Li
BLDC (brushless) 36V
savE
Automatic
0,20
104
106
93
3,5
3,9
2,2 2,2 2,2
2,4 2,4 2,4
10-14/25-35 10-14/25-35 10-14/25-35
9-13/23-33 9-13/23-33 9-13/23-33
Spur/6
15 (12)
BLi150 BLi150 BLi150
Lithium-Ion
4,2
36
1,3
) in conformity with EC directive 2000/14/
WA
536 LiXP
BLDC (brushless) 36V
savE
Automatic
0,20
2,4
104
106
93
4,1
4.6
2,5
2,8
10-14/25-35
9-13/23-33
Spur/6
20 (15)