Technical Data; Recommended Cutting Equipment - Husqvarna 440 II Operator's Manual

Technical data

Engine
Cylinder displacement, cu.in/cm
Cylinder bore, inch/mm
Stroke, inch/mm
Idle speed, rpm
Power, kW/hp @ rpm
Emissions Durability Period according to
California Air Resources Board, h.
Ignition system
Spark plug
Electrode gap, inch/mm
Fuel and lubrication system
Fuel tank capacity, US pint/litre
Oil pump capacity at 9,000 rpm, ml/min
Oil tank capacity, US pint/litre
Type of oil pump
Weight
Chainsaw without bar, chain and with empty
tanks, lb/kg
Chain/bar
Standard bar length, inch/cm
Recommended bar lengths, inch/cm (see
note 1)
Pitch, inch/mm
Thickness of drive links, inch/mm
Drive sprocket type/teeth
Chain speed at 133% of maximum engine
power speed, ft/s / m/s.
Note 1: The nominal guide bar size is not necessarily the same as the cutting length.
NOTE! This spark ignition system complies with the Canadian ICES-002 standard.

Recommended cutting equipment

A specific chain saw model has to be evaluated with the cutting equipment to be recommended and fulfill the
requirements in ANSI B175.1-2012 (Internal Combustion Engine-Powered Hand-Held Chain Saws-Safety and
Environmental Requirements).
A specific chain saw model has to be evaluated with the cutting equipment to be recommended and fulfill the
requirements in Canadian Standards Association Z62.3-11 (R2016) (Chain Saw Kickback)
Chain saw model(s) Husqvarna 435 II, 435e II, 440 II, 440e II met the safety requirements in ANSI B175.1-2012 when
equipped with the below listed saw chain and guide bar combination(s).
Chain saw model(s) Husqvarna 435 II, 435e II, 440 II, 440e II met the safety requirements in Canadian Standards
Association Z62.1-15 (Chain Saws) and Z62.3-11 (R2016) (Chain saw kickback) when equipped with the below listed
saw chain and guide bar combination(s).
Note: Other chain saw models may not meet the kickback requirements when equipped with the listed guide bar and
saw chain combinations.
Running H/F 2 Rev. 2 2017-04-28
TECHNICAL DATA
435 II
3
2.49/40,9
1.61/41
1.22/31
2900
1,6/2,2 @ 9000
125
NGK BPMR 7A/
Champion RCJ
7Y
0.02/0,5
0.78/0,37
13
0.53/0,25
Automatic
9.3/4.2
13/33
13-18/33-45
0.325/8,25
0.050/1,3
Spur/7
75.5/23,1
435e II 440 II
2.49/40,9 2.49/40,9
1.61/41 1.61/41
1.22/31 1.22/31
2900 2900
1,6/2,2 @ 9000 1,8 / 2,4 @ 9000 1,8 / 2,4 @ 9000
125 125
NGK BPMR 7A/ NGK BPMR 7A/
Champion RCJ Champion RCJ
7Y 7Y
0.02/0,5 0.02/0,5
0.78/0,37 0.78/0,37
13 13
0.53/0,25 0.53/0,25
Automatic Automatic
9.7/4.4 9.3/4.2
13/33 13/33
13-18/33-45 13-18/33-45
0.325/8,25 0.325/8,25
0.050/1,3 0.050/1,3
Spur/7 Spur/7
75.5/23,1 75.5/23,1
440e II
2.49/40,9
1.61/41
1.22/31
2900
125
NGK BPMR 7A/
Champion RCJ
7Y
0.02/0,5
0.78/0,37
13
0.53/0,25
Automatic
9.7/4.4
13/33
13-18/33-45
0.325/8,25
0.050/1,3
Spur/7
75.5/23,1
English – 33