IP Address
and Network
Mask
DNS
5.6 RFC 2684 Bridged (DHCP) Configuration
Location
ATM Setting
NAT
DNS
Configurations on the user PC
It is recommended to set the mode as obtaining an
IP address automatically.
It is recommended to set the mode as obtaining a
DNS server's IP address automatically.
Configurations on MT882
Parameters
Select any one from the eight
PVC
PVCs.
The value shall be provided by
VPI/VCI
your ISP.
The value shall be provided by
Encapsulation
your ISP. Usually you can keep
the default value: LLC.
Wan Type
Select "RFC2684 Bridged".
Connection
Select "DHCP".
Type
Default Route
Select "Enable".
It is recommended to enable the function of NAT.
It is recommended to have DNS Relay function
enabled.
And set DNS IP address provided by your ISP.
Huawei Technologies Proprietary
84
Comments