Table of Contents
Advertisement
RIP can be enabled on any existing WAN or LAN interfaces. It
may be specified to receive RIP requests and reply to them, and it
can be specified to send RIP queries, or to both receive and send
RIP packets. Furthermore, the RIP version can be specified. The
table below lists the parameters that can be specified for the
pull-down RIP menus. Click the Apply button to set up RIP as
specified.
II. Parameter explanation
Interface Name: it shows the interface on which you want
to share routing table information with other routing
devices.
RIP 1 Received: select it to enable or disable receiving
route information using RIP v1.
RIP 1 send: select it to enable or disable sending route
information using RIP v1.
RIP 2 Received: select it to enable or disable receiving
route information using RIP v2.
RIP 2 send: select it to enable or disable sending route
information using RIP v2.
Send MultiCast: select it to enable or disable sending
route information using MultiCast.
III. Save
Click the Submit button to save the settings in the RAM.
To save these configuration changes permanently,
Tools>System Setting page, and click Save & Restart
button to save new settings.
Huawei Technologies Proprietary
66
Hide quick links:
Advertisement
Table of Contents
