Huawei SmartAX MT882 User Manual page 100

Hide thumbs Also See for SmartAX MT882:
Table of Contents

Advertisement

Q: Why does my PC fall off line sometimes even with all
LEDs are in normal status?
The following scenarios may cause this problem..
1)
Be disconnected by the ISP.
2)
Some ISPs will have idle timeout setting to avoid wasting
IP. When the end user connects to the Internet too long
without any packet, the ISP will drop the connection.
Please contact with your ISP about this problem.
3)
Some ISPs don't provide a good quality ADSL signal line.
Therefore, when the ADSL line is unstable, your
connection will be dropped. Try with a telephone and find
the status of your ADSL signal line.
4)
If you have contacted the ISP and they promised the
quality of ADSL line, it may be the hardware issue and
please contact your vendor.
Q: When can I use the "Restore Factory Default Setting"
button?
If you changed some setting unconsciously in the Web
Management Interface and you forgot the detailed values that you
modified, please use the "Restore Factory Default Setting" button to
recover the factory default settings.
Q: How many methods can be used to restore the factory
default setting?
Totally two methods: 1) by the reset button on the rear panel of
the device. Push it three times continuously to take the factory
default setting into effect; 2) Select the option Factory Setting
Reboot in the page of Save & Reboot and then click Submit button.
Huawei Technologies Proprietary
90

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SmartAX MT882 and is the answer not in the manual?

Table of Contents