Reading Techniques; Standard Product Defaults - Honeywell genesis 7580g Quick Start Manual

Reading Techniques

Present the bar code to the scanner. The aimer turns on and the
LEDs turn up to read the code. If the light level in the room is not high
enough, the code may not be read.

Standard Product Defaults

The following bar code resets all standard product default settings.
RS485 Interface
The RS485 interface defaults to port 5B. If you have an IBM POS
terminal using port 9B, scan the appropriate code below to program
the terminal, then power cycle the cash register. If you have an IBM
POS terminal using port 17, scan IBM Port 17 Interface bar code
below.
IBM Port 9B HHBCR-1
Interface
IBM Port 17 Interface
Note: For additional RS485 interface selections, see the User's
Guide for your product at our website,
www.honeywellaidc.com.
Standard Product Defaults
IBM Port 9B HHBCR-2
Interface