PUBLIC DDRESS MPLIFIER/RECEIVER
pplication of The ntenna
pplication of The ntenna
- FM RECEIVING NTENN
The electric wave of FM broadcasting is weakening in hills and valleys, around buildings and in iron-
reinforced buildings.
- INST LL TION OF NTENN EXCLUSIVELY FOR FM
Listening to the broadcasting, fix the antenna after deciding the location and the direction so that the
reception may be optimized.
- INST LL TION OF NTENN USING THE CO XI L C BLE
Noisy reception may occur in built-up areas and factory sites as well as around power cables. This may
be the case even when an antenna is used exclusively for FM. In these regions, install the antenna using
75
coaxial cable.
- INDOOR NTENN
In the regions where FM broadcasting is heard comparatively well due to the near distance to the station
or wooden structure, you can receive broadcasting of good quality by using T-type antenna.(using
matching trans:300 /75 )
- M LE D NTENN
Fix one end of a six to eight metre length of vinyl-coated single cable to the
end to a high place like a wall.
- M OUTDOOR NTENN
Install the vinyl-coated cable to an outdoor place if the M reception is not good enough.
- M LOOP NTENN
Connecting the feeder of the loop antenna of the terminal of 300 .
Listening to the broadcasting, fix it after deciding the location and the direction so that the receipt
condition may be optimum.
10
P -1000B/1000BR
(P -1000BR ONLY)
ANT
AM
FM
UNBAL / 75Ω
LOOP
ANT.
M terminal and the other
Need help?
Do you have a question about the PA-1000B and is the answer not in the manual?