Rear Panel - Inter-m PA-1000B Operation Manual

PUBLIC DDRESS MPLIFIER/RECEIVER

Rear Panel

Rear Panel
1. GND TERMIN L
This grounding terminal is provided for connecting with the chassis of a turntable or other input device to
reduce hum and other ground loop noise. It may also be connected to a true earth ground, such as an
third-pin ground or water pipe, to further reduce ground loop noise.
2. C FUSE HOLDER
This holder contains the
same type and rating.
3. SPE KER OUTPUT TERMIN L STRIP
Connect speakers whose combined impedance is equal to or higher than the rated output impedance, as
shown below.
US /C N D & ssociated Version
4 /11V 8 /15V
4. M/FM NTENN TERMIN LS (P -1000BR ONLY)
The FM terminal accepts a 75 Ohm Coaxial cable that terminates at an FM antenna.
The M terminal accepts the lead wires of the provided
position may affect performance so it may be necessary to reposition the antenna for the best reception.
5. C POWER C BLE
Connect this cable to your C outlet.
6
P -1000B/1000BR
C overload protection fuse. If the fuse has blown out, replace it with a fuse of the
Impedance/Output Voltage
21 /25V 163 /70V
EC & ssociated Version
4 /11V 8 /15V 163 /70V 333 /100V
M antenna (or other suitable antenna).
C
ntenna