Reading Your Results - Nonin 9570 User Manual

Reading Your Results

When you put your finger in the GO
you see show:
• the amount of oxygen in your blood, displayed as %SpO
• your Pulse Rate, displayed as a 2 or 3 digit number, measuring the number
of times your heart beats per minute.
The Pulse Quality indicator (
display after the
bars indicates a greater pulse quality signal strength.
If you are not getting a pulse rate reading and your pulse quality indicator is weak, warm
the finger or reposition to another finger.
While the GO is formulating its reading immediately after activating the device, the
2
sensor disconnect indicator (
when you remove your finger to indicate the pulse signal is not detected or when there is
13
, you'll notice an LCD display come on. The numbers
2
) displays the strength of the pulse rate signal. Bars will
, indicating pulse signal strength (
) will appear. The sensor disconnect indicator also appears
; and
2
); the greater the number of