Download Print this page

Vision TREADMILL CONSOLE Manual page 25

Advertisement

ToUCH Console opeRATIon
note: there is a thin protective sheet of clear plastic on the overlay of the console that should be removed before use.
A) ToUCH DIsplAY: see next page for more information.
B) sTART: press to begin exercising, start your workout, or resume exercising after pause.
C) sTop: press to pause/end your workout. Hold for 3 seconds to reset the console.
D) InClIne
KeYs: used to adjust incline in small increments (0.5% increments).
e) speeD
KeYs: used to adjust speed in small increments (0.1 mPH increments).
F) InClIne ToGGles (T40 & TF40 onlY): used to adjust incline in small increments (0.5% increments).
G) speeD ToGGles (T40 & TF40 onlY): used to adjust speed in small increments (0.1 mPH increments).
H) enTeR: press to confirm programming selections during workout setup.
I)
BACK: press to go back to the previous step during program setup.
J)
ACCess poCKeT: contains iPod cable, usB for software updates or charging devices and headphone jack. use
the iPod cable to connect, charge and control your iPod or iPhone. *
K) ReADInG RACK: holds reading material.
l)
MeDIA plAYeR HolDeR: holds your media player or tablet.
M) sAFeTY KeY posITIon: enables treadmill when safety key is inserted.
n) eneRGY sAVeR lIGHT: indicates if machine is in energy saver mode. Press any key to wake up the machine.
* Will not charge usB devices which require more than 1 amp.
toucH
console
25

Advertisement

loading