To change the settings of your
heating system please use the main
controller located on the front panel
of the cylinder unit or on a wall. The
following is a quick guide to viewing
the main settings. Should you require
more information please refer to the
instruction booklet included with
Main controller parts
Screen in which all information is displayed.
Access to system settings for initial set up
Return to previous menu.
Used to select or save. (Enter key)
If system is switched off, pressing once will
turn system on. Pressing again when the
system is switched on will enable Holiday
Mode. Holding the button down for 3 secs
will turn the system off.
Used to scroll through menu and adjust
settings. Function is determined by the
menu screen visible on screen A.