Installation And Cabling Diagram (For Cars Without An On-Board Monitor Radio Only) - BMW 5 Series touring (E 39/2) LHD Installation Instructions Manual

6. Installation and cabling diagram
(for cars without an on-board monitor radio only)
0)
Lay the adapter cable A , as shown in the figure, and secure it with cable ties.
When installing the adapter wiring harness A start with branches A1 and A2 .
Branches A1 and A2 to the on-board monitor radio on the left-hand side of the boot
Branch A3 to the earth post X13016 on the left-hand side of the boot
Branch A4 to the installation site of the amplifier in the boot on the left
Branch A5 to terminal 30 post above the battery
Retrofit / Installation kit No. 82 83 0 140 507
Installation Instructions No. 01 29 0 140 511
Issue date: 06.2001
A5
A4
A3
A2
A1
039 0094 B
EN/9