5.
Installation and cabling diagram
(for cars without an on-board monitor radio only)
0)
Lay the adapter cable A , as shown in the figure, and secure it with cable ties.
When installing the adapter wiring harness A start with branches A1 and A2 .
Branches A1 and A2 to the radio in the instrument panel
Branch A3 to the earth post X1108 in the footwell on the left
Branch A4 to the installation site of the amplifier on the A pillar on the left
Branch A5 to terminal 30 post above the battery
Retrofit / Installation kit No. 82 83 0 140 507
Installation Instructions No. 01 29 0 140 511
A2
A1
A4
A3
Issue date: 06.2001
A5
039 0093 B
EN/8