BMW 5 Series touring (E 39/2) LHD Installation Instructions Manual page 14

9. To install the adapter cable (cars with an on-board monitor radio)
0
X13016
A3
0
31
B2
B
B1
A5
0
0
Retrofit / Installation kit No. 82 83 0 140 507
Installation Instructions No. 01 29 0 140 511
0
A5
039 0110 B
0
30
19
039 0111 B
Issue date: 06.2001
Screw branch A3, brown cable with earth eyelet
6 mm to the earth post X13016.
Lay branch A5 to terminal 30 post above the
battery.
Lay branch A5, red cable strand on the radio/
amplifier adapter cable, along the standard wiring
harness to terminal 30 post (30) above the battery
(see installation and cabling diagram). Cut off
branch A5, red cable strand, crimp on the contact
(19) and connect it to the fuse holder B1 on the
power supply cable with fuse B.
Screw branch B2, 0.8 mm cable eyelet on the
power supply cable with fuse B to the screw-on
point (31) on the terminal 30 post (30).
Secure the fuse holder B1 to the standard wiring
harness with a cable tie.
EN/14