Ending A Call; Muting A Call; Place A Call On Hold; Transferring A Call - Polycom SoundStation IP 7000 User Manual

3.4 Ending a call

Press or the End Call soft key.

3.5 Muting a call

Press to mute a call. The LEDs glow red to indicate that the other party (or parties) cannot hear you.
You can still hear all other parties while Mute is enabled. To turn mute off, press the same button as before.

3.5 Place a call on hold

During a call, press the Hold soft key. The LEDs blink red to indicate that a call is on hold. The following figure
shows James Smith on hold. The Resume soft key now displays on the screen and can be pressed to return to
the call.

3.6 Transferring a call

3. 6. 1 P e rfo rm ing a C onsu lt ativ e T r an sfe r
Perform a consultative transfer if you want to talk to the party to whom you are transferring the call. Or, you can
choose not to talk to the party. In this case, you wait for the party's ring-back sound, and then transfer the call.
During a call, press the Transfer soft key. The call is placed on hold. The Transfer to screen displays.
Place a call to the party to whom you want to transfer the call. See Placing Calls on page 3-2.
When you hear the ring-back sound, press the Transfer soft key. The transfer is complete. If you want to
talk privately to the person to which you are transferring the call before the transfer is complete, wait until
the person answers the call, talk to the person, and then press the Transfer soft key.
5