Using The Remote Control - Visual Circuits Firefly User Manual

Using the Remote Control

To load the Firefly system settings configuration from the Smart
Card using the remote control:
1. From the Firefly Main Menu, position the highlight on
"System Settings" and press the MENU/SELECT key.
2. Using the LEFT and RIGHT arrow keys, position the highlight
on "SCard" and press the MENU/SELECT key.
3. (From within the Smart Card Settings screen), use the UP and
DOWN arrow keys to move to "Load Config", use the LEFT
and RIGHT keys to position the highlight on "Load" and then
press the MENU/SELECT key.
As a result, the system settings configuration on the Smart Card (if
present) will be loaded from the Smart Card to the Firefly.
Using WebView
To load the Firefly system settings configuration from the Smart
Card using WebView:
1. Click on "System Settings" from the menu options on the left.
2. Scroll down to the Smart Card section.
3. Click on the "Load Config" button.
As a result, the system settings configuration on the Smart Card (if
present) will be loaded from the Smart Card to the Firefly.
Using the Front Panel
To load the Firefly system settings configuration from the Smart
Card using the front panel:
1. Press the MENU/SELECT key.
2. Using the LEFT and RIGHT arrow keys, locate the "Firefly
Settings Smart Card" menu.
3. Use the navigation keys to move to "Load Config" and then
press the MENU/SELECT key.
Smart Card
109