Inserting The Smart Card - Visual Circuits Firefly User Manual

Inserting The Smart Card

In order for you to license or access features or to save or load
system configurations, the Smart Card must be inserted into your
Firefly.
To insert the Visual Circuits Smart Card:
1. Orient the Smart Card so that the label is facing up and the
insert arrow is in the direction of the Firefly Smart Card reader
slot.
2. Slowly insert the Smart Card into the reader until the card is all
the way inside.
A green status light will be lit if the Smart Card has been inserted
correctly.
IMPORTANT
Due to licensing and security features, the Visual
Circuits Smart Card must remain inserted in the
Firefly throughout any saving, loading or feature
utilization processes.
Saving A Firefly Configuration To The Smart
Card
There are three different interfaces you may use to save a Firefly
configuration to the Smart Card: the remote control, WebView and
the front panel.
Using the Remote Control
To save the current Firefly configuration (System Settings) to the
Smart Card using the remote control:
1. From the Firefly Main Menu, position the highlight on
"System Settings" and press the MENU/SELECT key.
2. Using the LEFT and RIGHT arrow keys, position the highlight
on "SCard" and press the MENU/SELECT key.
Smart Card
107