Table of Contents
Advertisement
Quick Start Guide
External Control Commands
External control commands require that the com-
puter has an ASCII generating control program,
such as Hyper Terminal. The parameters are:
•
Serial port 1
•
9600 Bps
•
Echo typed letters locally
Use the following Visual Circuits commands to
configure the Firefly MZ.
FireflySetDefault
Syntax
fireflysetdefault
This command resets Firefly Networking
parameters to: static IP 10.0.1.1, WebView ON.
3 I
NSTALLING
Install Visual Circuit's Media Messenger software
from the Media Messenger CD by following the
online screens and prompts.
4 C
ONFIGURING
Setup on-board Firefly MZ FTP Server
•
Configure Firefly MZ properties.
•
Configure Firefly MZ FTP server.
Configure Firefly MZ Properties
1. Open the Main window of Media Messen-
ger.
2. Right-click in the Firefly MZ object in the
Network Pane and display Player drop
down menu.
3. Click on Properties to display Player Con-
figuration.
4. Fill in the Player Configuration fields.
4
M
M
EDIA
ESSENGER
FTP
FireflySetIpAddress
Syntax
fireflysetipaddr IP Address
FireflySetNetmask
Syntax
fireflysetnetmask netmask
FireflySetGateway
Syntax
fireflysetgateway gateway
FireflySetNetworkType
Syntax
fireflysetnetworktype 1 (DHCP) or 2
(Static)
During the first start up of Media Messenger, the appli-
cation requests Company Name and Registration
Key, enter the name and key precisely as Visual Cir-
cuits provided it.
Unique name to identify player
(Host Name)
Unique ID set in player before
installation, Media Messenger
uses it to identify the player.
If player belongs to a group,
select the group name from-
list.
Physical location of the player.
Set to one for Firefly MZ.
Advertisement
Table of Contents
