Adding External A/V Events To A Playlist - Visual Circuits Firefly User Manual

Remote Control
5. Repeat steps 1 through 3 to add additional external A/V events
to any of the other channels, if desired.
6. Save the playlist and exit the Playlist Editor.
7. Go into the Schedule Editor and schedule the "External AV 1"
playlist for your desired time slot, such as from 12:00 to 17:00
(see Schedule Editor on page 52 for details on scheduling).

Adding External A/V Events to a Playlist

If your application for utilizing the external audio/video feature
involves playing back regular internal videos with an occasional
insertion of external audio and/or video, you may want to add
external A/V events to an existing playlist.
The process for adding external A/V events to a playlist is similar
to the process of adding video files to a playlist.
To add an external A/V event to a playlist, follow the steps below:
1. (In the Playlist Editor main screen) The tab of the channel you
would like to start with should be highlighted as well as
selected. If it is not, you will need to press the RIGHT arrow
key until the channel tab is highlighted and then press the
MENU/SELECT key to select the playlist channel. You may
also press the number of the channel on the keypad of the
remote to highlight and select the channel at the same time.
2. Press the RIGHT arrow key until "Loaded Media" is
highlighted. Then press the DOWN arrow key to scroll down
to the listing [External AV].
46