IBASE Technology MI970VF User Manual page 46

BIOS SETUP
Graphics Configuration
Chipset
Main Advanced
Graphics Configuration
IGFX VBIOS Version
IGfx Frequency
Primary Display
Internal Graphics
GTT Size
Aperture Size
DVMT Pre-Allocated
DVMT Total Gfx Mode
► LCD Control
Primary Display
Select which of IGFX/PEG/PCI graphics device should be primary
display or select SG for switchable Gfx.
Internal Graphics
Keep IGD enabled based on the setup options.
DVMT Pre-Allocated
Select DVMT 5.0 Pre-Allocated (Fixed) graphics memory size used by
the internal graphics device.
DVMT Total Gfx Mem
Select DVMT 5.0 total graphics memory size used by the internal
graphics device.
Gfx Low Power Mode
This option is applicable for SFF only.
Primary IGFX Boot Display (LCD Control)
Select the Video Device that will be activated during POST. This has no
effect if external graphics present. Secondary booty display selection
will appear based on your selection. VGA modes will be supported only
on primary display.
42 MI970 User's Manual
Aptio Setup Utility
Boot Security Save & Exit
2132
350 MHz
Auto
Auto
→ ←
Select Screen
2MB
↑↓ Select Item
256MB
Enter: Select
64M
+- Change Field
Disabled
F1: General Help
F2: Previous Values
F3: Optimized Default
F4: Save ESC: Exit