Download Print this page

Cuckoo CRP-L10 Fuzzy Series Operation Instruction Manual page 16

Electric pressure rice cooker/warmer

Advertisement

Cuckoo's patented technology based on variable circuit design. User can select the degree of "softness"and
"glutinosity & tastiness" to meet individual taste.
Longer "SOAK" Time: rice becomes soft and glutinous. (selectable in 4 steps)
Longer "HEAT" Time: rice becomes tasty (avaiable in 4 steps) scorch may occur
Above 2 functions can be selected both or individually.
(soak time control mode) is shown with a beep sound when you press the "My Mode" button after
selecting a desired menu to apply or start.
MY MODE" function applies to "Glutinous, Mixed, GABA, Old rice, Nu Rung Gi" menu.
Unless one of "Glutions, Mixed, GABA, or Old rice" menu is selected, "Min/Heat" button cannot be entered.
"MY MODE" setting screen
"MENU" setting screen
Press the menu button and select
the menu. The selected menu will
be blinking.
(The following menu will continuously
repeat. Glutinous
Mixed/Brown
GABA
OLD RICE
Nu rung gi)
When setting up the soak time or reheating, the setting time will be displayed. During the cooking, preset and
warming, the setting time will be displayed as well.
Press the menu button to select the menu. Then the menu will blink.
(The following menu will continuously repeat. Glutinous Mixed/Brown GABA Old rice Nu rung gi)
Set-up time is stored until the next reset. No need to set-up at every cooking.
During Cooking, Warming and preset time cooking modes, SOAK and HEAT Time cannot be readjusted.
MY MODE' function may influence the quality of the dish or cause scorch. Mak sure that cooking time is not
changed by children.
Default settings are "SOAK" Time 0 min("
"MY MODE" function may elongate cooking time according to set-up time.
Scorching of rice may occur by longer "HEAT" Time("
"SOAK" Time Control Mode
Press "Min/Heat" button to set
Soaking Time step.
"HEAT" Time Control Mode
Press "Min/Heat" button to set Heating
Time step.
"), "HEAT" Time 0 min("
").
Setting completed screen after
7seconds, set-up time will be entered
with a buzzer sound. (Pressing any
buttons except "Hrs/Soak", Min/Heat"
or "Cancel" button will also enter the
set time)
").

Advertisement

loading