Advertisement
Wipe the water on the inner pot with a dry cloth and
put it in the main unit. Then connect the power plug.
Lid will not close if the inner pot is not placed correctly in the main body
(Place the inner pot to the corresponding parts of the main body)
If there is any alien substance on the temperature sensor or the bottom surface
of the inner pot(oven), wipe it off before putting the pot into the main unit.
Wipe the top heater plate well before cooking the rice.
If the top heater plate is not cleaned well it can cause smells and discoloration.
If there is any rice or alien substance on the oven packing or inside the upper part of the inner pot,
the steam will leak. This will make the rice under-cooked and crumble.
After setting the Lock/Unlock handle to "Lock",
check the pressure weight is horizontal and the
lock Lamp is on.
If you press the cook button without setting the Lock/Unlock
handle to "Lock" the cooker will not operate. You will hear "beep
beep beep" sound and
If it is hard to close the lid due to internal pressure, tilt the
pressure weight. This will make it easy to close.
When the product has any problem or if you use it inappropriately you can see the below marks.
When the inner pot is not placed into the unit.
When pressing the "Pressure Cook/Turbo" and "Timer" botton, while the Lock/Unlock handle
is on "Unlock".Turn the Lock/Unlock handle "Lock".
When you boil water only in the cooker for a while or when some other problem occurs.
When setting preset time longer than 13 hours
Set the preset time within 13 hours(Refer to page 21.)
is shown in the LCD.
Temperature sensor problem.
(Consult the service center and dealer.)
Temperature
Sensor
Lock
Advertisement
