Ipod Touch 5Th Generation; Specifications - Pioneer AVH-X7500BT Owner's Manual

Additional information
To users of the iPhone 5 and the iPod touch 5th
generation
For users of the iPhone 5 or the iPod touch 5th generation, a firmware update is
required to perform the operations described in the "Starting procedure" section under
the "AppRadio Mode" in this Manual.
Refer to the following website for the the firmware update.
http://www.pioneer.eu/eur/body.html
The firmware update is not required for the following users:
• Users who need only the operations described in the "iPod" section of the Manual
• Users of the iPhone 4, iPhone 4S, or the iPod touch 4th generation who need the
operations described in the "AppRadio Mode" section of the Manual

Specifications

General
Power source ................................... 14.4 V DC
(10.8 V to 15.1 V allowable)
Grounding system ....................... Negative type
Maximum current consumption .............. 10.0 A
Dimensions (W x H x D):
DIN
Chassis ......... 180 mm x 50 mm x 160 mm
Nose ............... 188 mm x 58 mm x 32 mm
D
Chassis ......... 178 mm x 50 mm x 165 mm
Nose ............... 170 mm x 46 mm x 27 mm
Weight ..................................................... 2.0 kg
Display
Screen size/aspect ratio .... 7.00 inch wide/16:9
(effective display area:
154.1 mm x 85.9 mm)
Pixels ......................... 1 152 000 (2 400 x 480)
Display method .................... TFT active matrix,
driving type
Color system ........... NTSC/PAL/PAL-M/PAL-N/
SECAM compatible
Durable temperature range
(power off) ....................... –20 °C to +80 °C
Audio
Maximum power output ..................... 50 W x 4
70 W x 1/2 $ (for subwoofer)
Continuous power output ................... 22 W × 4
(50 Hz to 15 000 Hz,
5 % THD, 4 $ load,
both channels driven)
Load impedance ................ 4 $ (4 $ to 8 $ (2 $
for 1 ch) allowable)
Preout maximum output level ................... 4.0 V
Equalizer (8-Band Graphic Equalizer):
Frequency .... 40 Hz/80 Hz/200 Hz/400 Hz/
1 kHz/2.5 kHz/8 kHz/10 kHz
Gain ................................................. ±12 dB
HPF:
Frequency ................... 50 Hz/63 Hz/80 Hz/
100 Hz/125 Hz
Slope ......................................... –12 dB/oct
Subwoofer (mono):
Frequency ................... 50 Hz/63 Hz/80 Hz/
100 Hz/125 Hz
Slope ......................................... –18 dB/oct
Gain .................................. +6 dB to –24 dB
Phase ............................... Normal/Reverse
Bass boost:
Gain .................................... +12 dB to 0 dB
DVD Player
System ................... DVD video, Video CD, CD,
WMA, MP3, AAC, DivX,
JPEG, MPEG player
Usable discs ........... DVD video, Video CD, CD,
CD-R/RW, DVD-R/RW/R DL
Region number ............................................... 2
Frequency response ............ 5 Hz to 44 000 Hz
(with DVD, at sampling
frequency 96 kHz)
Signal-to-noise ratio .................... 96 dB (1 kHz)
(IEC-A network) (RCA level)
Output level:
Video ...................... 1.0 Vp-p/75 $ (±0.2 V)
Number of channels .......................... 2 (stereo)
MP3 decoding format ................... MPEG-1 & 2
Audio Layer 3
WMA decoding format ...... Ver. 7, 7.1, 8, 9, 10,
11, 12 (2 ch audio)
(Windows Media Player)
AAC decoding format ................. MPEG-4 AAC
(iTunes encoded only) (.m4a)
(Ver. 10.6 and earlier)
DivX decoding format ................ Home Theater
Ver. 3, 4, 5.2, 6
(Except ultra and HD) (.avi, .divx)
MPEG video decoding
format ............... MPEG1, MPEG2, MPEG4
USB
USB standard specification ................ USB 1.1,
USB 2.0 full speed
USB 2.0 high speed (For audio files)
Maximum current supply .......................... 1.0 A
USB Class ............ MSC (Mass Storage Class)
File system ............................... FAT16, FAT32
Note
• Specifications and the design are subject to modifications without notice.
MP3 decoding format ......... MPEG-1 & 2 Audio
Layer 3
WMA decoding format ....... Ver. 7, 7.1, 8, 9, 10,
11, 12 (2 ch audio)
(Windows Media Player)
AAC decoding format ................. MPEG-4 AAC
(iTunes encoded only)
(Ver. 10.6 and earlier)
WAV:
WAV signal format ................. Linear PCM,
MS ADPCM (.wav)
Sampling Frequency .............. Linear PCM:
16 kHz, 22.05 kHz, 24 kHz,
32 kHz, 44.1 kHz, 48 kHz
MS ADPCM: 22.05 kHz, 44.1 kHz
FM tuner
Frequency range ......... 87.5 MHz to 108.0 MHz
Usable sensitivity ............... 9 dBf (0.8 µV/75 $,
mono, S/N: 30 dB)
Signal-to-noise ratio ..... 72 dB (IEC-A network)
MW tuner
Frequency range ............ 531 kHz to 1 602 kHz
(9 kHz)
Usable sensitivity ............... 25 µV (S/N: 20 dB)
Signal-to-noise ratio ..... 62 dB (IEC-A network)
LW tuner
Frequency range ............... 153 kHz to 281 kHz
Usable sensitivity ............... 28 µV (S/N: 20 dB)
Signal-to-noise ratio ..... 62 dB (IEC-A network)
Bluetooth
Version ........................... Bluetooth 3.0 certified
Output power ....................... +4 dBm Maximum
(Power class 2)
68