Setting Demo Mode; Switching Sound Muting/Attenuation; Setting The Rear Output And Subwoofer Controller; Using The Keyboard - Pioneer AVH-X7500BT Owner's Manual

System settings
4. Touch the desired language.
English (English) – Português (Portuguese) – Español (Spanish) – Français
(French) – Deutsch (German) – Русский (Russian) – Italiano (Italian) – Nederlands
(Netherland) – Türkçe (Turkish)
• If a language other than Russian is selected, English is used for the following items.
– On-screen display
– Multi language setting for DivX

Setting Demo Mode

Once Demo Mode is turned on, the Demo screen appears.
Refer to "Demo mode" on page 6.
1. Press the home button to switch to the home display.
2. Touch the system key to open the system menu.
3. Touch Demo mode on the system menu to turn Demo mode on or off.
• On – The Demo screen appears.
• Off – The Demo screen does not appear.

Switching sound muting/attenuation

Sound from this system is automatically muted or attenuated when a signal from
equipment with a mute function is received.
• Sound from this system returns to normal when the muting or attenuation is
canceled.
1. Press the home button to switch to the home display.
2. Touch the system key to open the system menu.
3. Touch Mute/ATT until the desired setting appears.
Touch Mute/ATT until the desired setting appears in the display.
• Mute – Muting
• ATT –20dB – Attenuation (ATT –20dB has a stronger effect than ATT –10dB)
• ATT –10dB – Attenuation
• Off – Turns the sound muting/attenuation off
Notes
• When Mute is displayed, the sound is turned off and no audio adjustments can be made.
• When ATT is displayed, the sound is attenuated and only the volume can be adjusted. (No
other audio adjustments can be made.)
• Operation returns to normal when the phone connection is ended.

Setting the rear output and subwoofer controller

This unit's rear output (rear speaker leads output and RCA rear output) can be used
for full-range speaker (Full) or subwoofer (Subwoofer) connection. If you switch the
rear output setting to Subwoofer, you can connect a rear speaker lead directly to a
subwoofer without using an auxiliary amp.
Initially, the unit is set for a rear full-range speaker connection (Full).
1. Turn the source off.
Refer to "Turning the source ON/OFF" on page 8.
2. Press the home button to switch to the home display.
3. Touch the system key to open the system menu.
4. Touch Rear Speaker on the system menu to switch the subwoofer output or full-
range speaker.
• When no subwoofer is connected to the rear output, select Full (full-range speaker).
• When a subwoofer is connected to the rear output, select Subwoofer (subwoofer).
Notes
• Even if you change this setting, there will be no output unless you turn the subwoofer output
on (refer to "Using subwoofer output" on page 38).
• Both rear speaker lead outputs and RCA rear output are switched simultaneously in this
setting.

Using the keyboard

Keyboard is available only in AppRadio Mode.
Refer to "Setting the Keyboard" on page 27.
44