Tuning In To Strong Signals; Using Itunes Tagging; Storing The Tag Information To This Unit; Storing The Tagged Information To Your Ipod - Pioneer AVH-X7500BT Owner's Manual

Tuner

Tuning in to strong signals

Local seek tuning allows you to tune in to only those radio stations with sufficiently
strong signals for good reception.
FM: Off – – – –
MW/LW: Off – –
The more there are on the screen, the fewer the stations that can be selected. Only
stations with the strongest signals in your local area can be selected.
If there are fewer , this unit will be able to receive broadcasts from weaker stations.

Using iTunes tagging

Note
• For more details about iTunes tagging, refer to "About iTunes tagging" on page 63.

Storing the tag information to this unit

1. Tune in to the broadcast station.
2. Store the tag information to this unit.
Refer to "Tuner operations" on page 13.
You can store the information if the Tag indicator is displayed while the desired song
is being broadcast.
• While storing the tag data on this unit, Tag flashes.
• The tag information for up to 50 songs can be stored on this unit.
• Depending on the timing of when the tag information is stored, the tag information
for the song played before or after the currently playing song may also be stored.
3. When completed, indicator turns off and

Storing the tagged information to your iPod

1. Connect your iPod.
When your iPod is connected to this unit, your iPod starts storing the tagged
information automatically.
2. When completed, indicator turns off and the tagged information is stored on
your iPod.
indicator is displayed.

Receiving traffic announcements

(Only available on FM stations)
Regardless of the source you are listening to, you can receive traffic announcements
automatically with TA (traffic announcement standby).
1. Tune in to a TP or enhanced other network's TP station.
indicator lights up.
2. Turn Traffic announcement on.
Refer to "Tuner operations" on page 13.
• If the TA function is turned on when you are not tuned in to a TP or enhanced other
network's TP station, the indicator lights up dimly.
3. Turn VOLUME to adjust the TA volume when a traffic announcement begins.
The newly set volume is stored in the memory and will be recalled for subsequent
traffic announcements.
4. Turn off the announcement while a traffic announcement is being received.
Refer to "Tuner operations" on page 13.
The tuner returns to the original source but remains in the TA function standby mode
until the icon is touched again.
Receiving alarm broadcasts interrupting regular
broadcasts
(Only available on FM stations)
You can choose to receive the alarm broadcast automatically regardless of the source
being listened to.
Reception of the previous program resumes once the alarm broadcast ends.

Using PTY functions

(Only available on FM stations)
You can tune in to a station using PTY (program type) information.
15