Bluetooth Connection Menu; Bluetooth Connection Menu Operations; Pairing From This Unit; Connecting To A Bluetooth Device Automatically - Pioneer AVH-X7500BT Owner's Manual

Bluetooth connection menu

Bluetooth connection menu operations

If you are using a cellular phone that can be connected via Bluetooth wireless
technology, we recommend that you use your phone to search for this unit and
establish a connection between it and your phone. The PIN code is set to 0000 as
default. The product name for this unit will display on your phone as the device name.
For details, refer to "Entering PIN code for Bluetooth wireless connection" on page 50.
For further details concerning the procedures for establishing Bluetooth wireless
connections, refer to the instruction manual for the phone.

Pairing from this unit

1. Press the home button to switch to the home display.
2. Touch the Bluetooth key to open the Bluetooth connection menu.
3. Touch Connection to select a device.
4. Start to search.
Starting to search.
While searching, is displayed and when available devices are found, the device
names or Bluetooth device addresses (if names cannot be obtained) are displayed.
• If you want to switch between the device names and Bluetooth device addresses,
touch the icon.
Switching between the device names and Bluetooth device addresses.
• To cancel searching, touch Stop.
• If three devices are already paired, Memory Full is displayed and pairing cannot be
performed. In such cases, delete a paired device first. Refer to this page.
• If no device can be found, Not Found is displayed. In such cases, check the status
of the Bluetooth device and search again.
5. Touch a device name to select the device you want to connect to.
While connecting, Pairing is displayed. If the connection is established, Paired is
displayed.
• If your device support SSP (Secure Simple Pairing), six-digit number appears on the
display of this unit. Once the connection is established, this number disappears.
• If the connection fails, Error is displayed. In such cases, try again from the
beginning.
• The PIN code is set to 0000 as the default, but can be changed. Refer to "Entering
PIN code for Bluetooth wireless connection" on page 50.
• Once the connection is established, the device name is displayed.
Touch the device name to disconnect.
• If you want to delete a paired Bluetooth telephone, display Delete OK?. Touch Yes
to delete the device.
Deleting a paired device.
• Never turn the unit off while the paired Bluetooth telephone is being deleted.

Connecting to a Bluetooth device automatically

If this function is set to on, a connection between your Bluetooth device and this unit
will take place automatically as soon as the two devices are less than a few meters
apart.
Initially, this function is set to on.
1. Press the home button to switch to the home display.
2. Touch the Bluetooth key to open the Bluetooth connection menu.
3. Touch Auto Connect to turn automatic connection on.
If your Bluetooth device is ready for a Bluetooth wireless connection, a connection to
this unit will automatically be established.
• To turn automatic connection off, touch Auto Connect again.
If connection fails, "Auto connection failed. Retry?" appears. Touch Yes to
reconnect.
4. Once you turn your vehicle's ACC switch on again, a connection is established
automatically.
49