Application Examples; Installation Requirements - Ubiquiti AG-HP-5G27 Quick Start Manual

Installation Requirements

• 13 mm or ½" wrench
• Shielded Category 5 (or above) cabling should be used for
all wired Ethernet connections and should be grounded
through the AC ground of the PoE.
We recommend that you protect your networks from the
most brutal environments and devastating ESD attacks
with industrial-grade shielded Ethernet cable from Ubiquiti
Networks. For more details, visit www.ubnt.com/toughcable

Application Examples

The airGrid mounted outdoors with the Grid Reflector installed
provides directional outdoor coverage
(gain reflector-dependent).
The airGrid mounted outdoors without the Grid Reflector
installed provides outdoor-to-indoor coverage using the 3 dBi
Antenna Feed only.