Switching The Communication Quality; Disconnecting Bluetooth - Panasonic SC-NA30 Operating Instructions Manual

Switching the communication quality

You can change the transmission speed to prioritise sound quality or connectivity.
• The default setting is "Emphasis on sound quality". When the sound is interrupted, select
"Emphasis on connectivity".
While pressing and holding [LP], press and hold [
Emphasis on connectivity:
A beep sound is emitted once, and the Bluetooth
indicator (green) flash once.
Emphasis on sound quality:
A beep sound is emitted twice, and the Bluetooth
indicator (green) flash twice.
Note
• Press [LP], and within 2 seconds, press [
mode setting will be changed.

Disconnecting Bluetooth

• Turn off this unit or the device.
• Stop / disable the Bluetooth
• (For NFC-compatible devices only)
Touch and hold your device to NFC touch area of this unit again.
Note
• This unit can only be connected to one device at a time.
• This unit can register up to 8 devices.
When the number of registered devices exceeds the maximum limit, a device that has not
made a Bluetooth
registration of the device. To use the device again, re-register it.
• If the unit connected to the AC adaptor is selected from a Bluetooth
on automatically even when it is turned off, establishing a Bluetooth
• If the image and sound are out of sync during playback, restart the playback app you are
using. If the problem persists, connect the Bluetooth
(commercially-available).
• The One-Touch Connection may not work properly depending on the type of device being
used.
• Depending on the specifications and settings of a device, it can fail to connect or some
operations can be different.
• Refer to the operating instructions of the Bluetooth
12
®
transmission of the device.
®
connection for the longest time will be replaced. This will cancel the
®
] for 4 seconds or more.
indicator (blue) and the LP mode
®
indicator (blue) and the LP mode
®
]. If [ ] is pressed after this time limit, the LP
device and this unit with an audio cable
®
device for details.
®
device, the unit will turn
®
connection.
®