Bluetooth ® Standby; Switching The Bluetooth Communication Mode; Switching Dual Audio Broadcasts - Panasonic Sound Slayer SC-HTB01 Owner's Manual

Bluetooth Standby
®
(Factory default: Enabled)
When this function is enabled, this system
automatically turns on when a Bluetooth
is established from a paired Bluetooth
1 Press and hold [VOL j] on this system and
[SUBWOOFER j] on the remote control at the
same time for 4 or more seconds.
(The LED indicators indicate the current mode)
Enabled
2 Press [SUBWOOFER j] again while the current
status is being indicated (about 20 seconds).
• The setting changes each time you press the button.
The display returns to the normal one about 20 seconds
after the operation.
Switching the Bluetooth
communication mode
(Factory default: Mode 2)
You can switch the Bluetooth
Using the following procedure, you can switch
between the default Mode 2 (priority given to sound
quality) and Mode 1 (priority given to connectivity).
1 Set the input of this system to "
(Cancel connection of the device.)
2 Press and hold [VOL j] on this system and
[STANDARD] on the remote control at the same
time for 4 or more seconds.
(The LED indicators indicate the current mode.)
Mode 1
3 Press [STANDARD] again while the current
status is being indicated (about 10 seconds).
• The setting changes each time you press the button.
The display returns to the normal one about 10 seconds
after the operation.
connection
®
device.
®
Disabled
®
communication mode.
®
"
Mode 2
Operation

Switching dual audio broadcasts

Use the following procedure to switch dual audio
broadcasts between the primary audio channel and
the secondary audio channel.
1 Confirm that the audio output of the connected
device is set to bitstream (AAC).
2 Press and hold [MUSIC] on the remote control for
4 or more seconds.
(The LED indicators indicate the current mode.)
Setting
value
Primary
audio
channel
Secondary
audio
channel
Primary
audio
channel and
secondary
audio
channel
3 Press [MUSIC] again while the current status is
being indicated (about 20 seconds).
• The setting changes in the following order each time you
press [MUSIC].
"Primary audio channel"
→ "Secondary audio channel"
→ "Primary audio channel and secondary audio channel"
→ "Primary audio channel" (repeats)
17
Indicators