Panasonic SC-NE3 Connection Manual

VQC9399
Wi-Fi ® connection guide
You can wirelessly stream music from an iOS device, an Android
Mac/PC to SC-NE5/SC-NE3's speakers. To use this music-streaming feature,
SC-NE5/SC-NE3 must join the same 2.4 GHz wireless network as the compatible
device through the wireless network router (access point).
Wireless network
*1
iOS device , Android device
or Mac/PC
*1: Refer to the Operating Instructions for the compatibility.
Screen images used in this sheet : iPhone 4S, iOS 6.0.1
WPS button method
1
Press and hold [s WPS] on
the speaker unit for more than
3 seconds.
Blinks in blue
2
Press the WPS button on the
wireless network router.
* 2
The settings are completed when
"SUCCESS" is displayed and indicator
lights in blue.
Lights in blue
*2 : The marking may differ.
3
Press [OK] on the remote
control to exit.

Using AirPlay

The following explanations are based on an
iPhone.
Preparation
≥Turn this system on.
Wireless Speaker System
Model No. SC-NE5
TM
device or a
SC-NE5/
router SC-NE3
Using the iPod dock
(SC-NE5 only)
The following explanations are based on an iPhone.
1 4
Disconnect any devices
connected to the CD unit.
2
Connect the iPhone to your
home wireless network.
3
Connect the iPhone to the CD
unit.
Choose one of the following
connections.
5
Lightning connector compatible iPod
touch/iPhone:
iPod touch/iPhone/iPad with
iOS 5.0 or later:
6
7
Dedicated cable supplied with the iOS
device
1
Connect the iPhone to your home wireless network.
"Settings"
2
Select "Panasonic NE5 (NE3) _ _ _ _ _ _" from the AirPlay
"Music"
Start wireless network settings
Preparation
1 Place SC-NE5/SC-NE3 close to the wireless network router.
2 Turn this system on.
3 Follow the chart below to choose the network setting method.
SC-NE3
≥ If you want to perform wireless setting with your Mac/PC, or you want to apply the advanced
setting, refer to [SC-NE5] "Method 4"
Unlock your iPhone and then
press and hold
[sNETWORK SETUP] on the
CD unit for more than 3
seconds.
A message will pop-up on the
iPhone. Allow the iPhone to
share the wireless network
settings.
The settings are completed
when "SUCCESS" is displayed
and the indicator on the
speaker unit lights in blue.
Press [OK] on the remote
control to exit.
"Wi-Fi"
*3 : You may be prompted for the password. Enter the password of your home wireless network.
"Panasonic NE5 (NE3) _ _ _ _ _ _"
or [SC-NE3] "Method 3" in the operating instructions.
Does your wireless network router support
WPS (Wi-Fi Protected Setup
Yes
Which model do you use?
SC-NE5
Are you using an iPod touch/iPhone/iPad?
Is the iOS version 5.0 or later?
Yes
Using the smartphone app
You can make the wireless
network settings with the app,
"Panasonic Stereo System
Network Setup" (for free).
If you're using an Android device,
download the app at the Google
TM
Play Store. If you're using an
iPod touch/iPhone/iPad,
download it at the App Store.
Preparation
≥Connect your smartphone to
your home wireless network.
≥Check the password for your
home wireless network.
1
Press [SETUP] on the remote
control repeatedly to select
"NET SETUP" and then press
[OK].
2
Start "Panasonic Stereo
System Network Setup" on
your smartphone and follow
the indications.
Your home wireless
Turn on
network name
(SSID)*3
icon and start play.
TM
)?
No / Do not know
SC-NE3
No
∫ Note for the iOS version
After step 2
1 Enter the password for the home
wireless network to which the iOS
device is connected.
2 When a message instructing you
to connect the iOS device to this
system is displayed, press the
home button to close the app.
3 On the Wi-Fi network selection
screen in "Settings", select
"00 Setup _ _ _ _ _ _".
4 When a message indicating the
completion of the connection to
this system is displayed, restart
the app.
5 When a message indicating the
completion of the Wi-Fi setup of
this system is displayed, close the
app, and then check the operation
of AirPlay, etc.
Play starts.
(with a slight delay)