Related Manuals for Mitox HTD600
Summary of Contents for Mitox HTD600
- Page 1 HTD600 HEDGE-TRIMMERS SAFETY & OPERATING INSTRUCTIONS READ THIS MANUAL CAREFULLY BEFORE OPERATING THE MACHINE WARNING: THIS SYMBOL INDICATES IMPORTANT SAFETY PRECAUTIONS...
-
Page 2: Technical Specifications
TECHNICAL SPECIFICATIONS Name/Type HTD600 Net Weight Total Length mm 1290 Outward Total Width mm Size Total Height mm Type double sided Blade Total Length mm Power Transmission Method Automatic centrifugal clutch, spur gear, cam-crank 4.2 ：1 (63:15) Reduction Rate Type... - Page 3 HEDGE-TRIMMER DESCRIPTION ① Throttle control ② Rear handle ③ Starter ④ Front handle ⑤ Blade cover ⑥ Muffler assy. ⑦ Fuel tank ⑧ Clutch case ⑨ Cutting blade Fig.1. Fig.2. Recoil Start Fuel Tank Cap Fuel Primer Bulb...
-
Page 4: Safety Symbols
SAFETY SYMBOLS 6. Beware of objects being thrown from the 1. Warning, Danger, Caution operating zone. 7. Warning: keep all people, animals and vulnerable objects at least 15 metres from 2. Read documentation safety instructions which are provided in this user the working area. -
Page 5: General Information
• Two-stroke petrol is highly inflammable. GENERAL INFORMATION: Before refuelling always stop engine, do not smoke and make sure the area is SAFETY INSTRUCTIONS well ventilated and free from any external flame or sparks. Wipe any For your safety please read the owner’s fuel spilt immediately. -
Page 6: Hedge-Trimmer
synthetic two-stroke oil specially made for SAFETY INSTRUCTIONS cont’d high performance two-stroke engines at a ratio of 25 parts petrol to 1 part of oil. although the hedge-trimmer is designed Using synthetic oil will reduce the to keep vibration to a minimum, it is formation of ash and carbon deposits on recommended that short rest breaks are taken to minimise the harmful effect... -
Page 7: Stopping The Engine
Fuel Filter After starting release the choke lever Change fuel filter every 20 hours or to the open position (see Fig.2) annually. Spark Plug Service To avoid damage to recoil starter, do not pull recoil rope its entire length Clean or replace spark plug and reset gap and do not let go of rope when it is every 50 hours of operation. - Page 8 Retain the receipt of purchase without which no warranty can be offered. U.K. REPAIR AND MAINTENANCE To find your nearest stockist and authorised service dealer please contact Mitox Garden Machinery Wincanton Business Park WINCANTON Somerset BA9 9RS U.K.
Need help?
Do you have a question about the HTD600 and is the answer not in the manual?
Questions and answers