Muting The Microphone Input Quickly (Voice Mute); Call Switching Operation; Bluetooth Audio Operation; Recalling The Bluetooth Audio Mode - Alpine CDE-135EBT Owner's Manual

volume as low as acceptable, will reduce it. Positioning the microphone
in a direction away from the main car speakers (e.g. clipped on sun
visor) may also reduce feedback at high volume.
Muting the microphone input quickly
(Voice Mute)
While calling, activating the Voice Mute function will instantly mute the
microphone input. Your voice will not be heard by the caller.
While calling, press  to mute the microphone input.
Press  again will bring the microphone input back to its
previous volume level.

Call Switching Operation

While making a call, this function allows you to initiate the transfer of
the audio between the mobile phone and the speakers in the car.
While calling, press and hold ENTER or  for at
least 2 seconds to switch the call sound between the unit
and mobile phone.
Note
• Depending on the mobile phone, this operation may not be performed.

BLUETOOTH Audio Operation

Audio information of a BLUETOOTH compatible mobile phone, a
portable player, etc., is controllable/playable wirelessly* from this unit.
* To play back audio, a mobile phone or a portable player conforming to
A2DP (Advanced Audio Distribution Profile) and AVRCP (Audio/
Video Remote Control Profile) is required.
Not all functions work with all devices.
Notes
• Set "AUDIO" to ON when you want to use BLUETOOTH Audio
function. Refer to "Setting the BLUETOOTH Connection (BT IN)" on
page 19.
• During a call, sound on the BLUETOOTH audio source is muted.
• If you operate the Hands-free phone (e.g. searching in the phonebook)
while using the BLUETOOTH Audio function, BLUETOOTH Audio
playback may be affected.

Recalling the BLUETOOTH Audio Mode

Press SOURCE/ to select the BT AUDIO mode.

Selecting the desired Song

Press .
Return the beginning of the song being played back.
Press .
Forward the next song.
Pressing and holding  or  will fast backward/fast
forward track continuously.

Pausing

Press .
A playback stops. Pressing again will resume a playback.
24
-EN

USB Memory (optional)


 
Rotary encoder/


VIEW
BAND/F/R
SOURCE/
* The illustration is for CDE-135EBT.

Connecting USB Memory (optional)

If USB Memory device is connected to the unit, MP3/WMA/AAC files
can be played back.
Note
• When TAG is set in "Setting the USB Search Mode" (refer to "Setting the
USB Search Mode" on page 18), "BANKING" is displayed for several
seconds each time a Flash Memory device is connected or Ignition is
cycled.
There are two USB connectors on CDE-135EBT, you can choose to
connect a USB Memory to Front USB Connection Terminal or Rear USB
Connector. There is only one USB connector (Front USB Terminal) on
CDE-134EBT.
When connect USB Memory to Front USB
Connection Terminal
1
Open the cover of the USB Connection Terminal.
2
Connect the USB Memory directly to the USB Connection
Terminal, or via the USB cable.
This unit

/ENTER
4 5
Preset buttons
(1 through 6)
USB Connection Terminal
USB Memory
(sold separately)
or
USB Memory Cable (sold
(sold separately) separately)