Other Essential Functions; Setting The Time; Selecting A Ringing Tone; In-Call Options - Nokia 6090 User Manual

3. Other Essential Functions

Setting the time

1. Press M (Menu) and use b to access Clock and press
M (Select).
2. Use b to access Clock settings, press M (Select).
3. Use b to scroll to Set the time and
press M (Select).
4. Key in the time, e.g 0, 8, 3, 0
for 8.30.
5. Press M (OK) to confirm. The time is
displayed in the right-hand corner of the display.
Note: The car phone does not contain its own battery, therefore
the setting will be lost if the voltage of the car battery is low.

Selecting a ringing tone

1. Press M (Menu).
2. Use b to access Tones and press M (Select).
3. Use b to access Ringing tone and press M (Select).
4. Use b to scroll to the ringing tone you prefer. The phone
gives you a ringing sample. Press M (OK) to select it.
5. Press and hold c to exit the menu.
©
1999 Nokia Mobile Phones. All rights reserved.

In-call options

Your phone provides a number of control functions that you can
use during a call. You cannot utilise all of these functions at all
times. Only those functions which are available and enabled will
be shown in the in-call menu.
Many of the in-call options are network services.
While you have a call in progress, press M (Options) to enter
¹ the in-call menu. If the Navi key text is End, press c to acti-
Time:
vate the text Options.
hh:mm
The following in-call options may be available:
OK
Hold or Unhold
New Call
Answer
Reject
Swap
End this call
Send DTMF
Send
End all calls
Phone book
To exit the in-call menu, press c.
to hold or release a call
to make a call during an on-going call
to answer the incoming call
to reject the incoming call
to switch between the two calls
to end the active call
to send DTMF tones
to send the character string on the display to
the network
to end both calls
to enter the Phone book
Setting the time
15