The Display Indicators - Nokia 6090 User Manual

Key in the PIN code of the SIM card used
(factory setting: SIM card of the handset),
which is displayed as ****, and press M
(OK), see "4-3-5 Change access codes" on
page 29.
Note: If you enter an incorrect PIN three times in succession,
the card is blocked and you have to re-enter the PIN using the
personal unblocking key number (PUK), see "Access codes" on
page 35.
Note: If your SIM card is lost or stolen, immediately inform your
network operator or service provider to block the card and thus
prevent any unauthorised use at your expense. As a rule, you will
have to specify your name, the SIM card number and your sub-
scriber's number.
If the handset asks for a security code
Key in the security code, which is displayed
as *****, and press M (OK), see "About
labels on your car phone" on page 8.
Note: If you take out the SIM card while the
phone is in operation, information could be
lost.
©
1999 Nokia Mobile Phones. All rights reserved.

The display indicators

¹
Enter PIN code
The indicators described below are shown
of handset SIM
****
when the car phone is ready for use, and no
OK
characters have been entered by the user.
This is also called a "clear display".
Operator Indicates which cellular network
½
10:12
¼
‰
¹
²
Security
code
*****
OK
the car phone is currently being used in.
Depending on your SIM card, the name of the ser-
vice provider may be shown in the next line.
Shows the signal strength of the cellular network at
your current location: the higher the bar, the stron-
ger the signal.
Shows the time.
Shows that you have received a short message.
Notifys divert of all voice calls.
Shows that the phone is in silent mode.
The display indicators
10:12
Operator
½
Menu
11