10.4.
ATST3 Command
The ATST3 command, will return the time and date the firmware in the RV-M7 was compiled.
10.5.
ATST4 Command
The ATST4 command will return internal timers that tell how long the modem has been powered up
and running. All of these timers restart a 0 upon power up.
Run time:
Years: nnn
Days : nnn
Hours: nnn
Min:
nnn
Sec:
nnn
Uptime:nnn
OK
M7 PL Technical Manual
(number of years running)
(number of days running, resets to 0 after one year)
(number of hours running, resets to 0 after 23 hours, 59 minutes, 59 seconds)
(number of minutes running, resets to 0 after 59 minutes, 59 seconds)
(number of seconds running, resets to 0 after 59 seconds)
(number of seconds running. Does not reset.
37
Raveon Technologies Corp.