Omega ECHO TOUCH Operation And Installation Manual page 11

Using The ECHO-TOUCH Controller (cont'd)
AUX 4 (IF EQUIPPED): Press and release the "AUX4" icon using the same
method as with your original controller (i.e., 1 or 2 presses, etc).
• AUX4 IS A VIRTUAL CHANNEL OUTPUT ON THE
SYSTEM'S DATA PORT. IF USED, IT WAS CONFIG-
URED BY YOUR INSTALLER.
• YOUR SYSTEM SHOULD REACT THE SAME AS
WITH YOUR ORIGINAL CONTROLLER.
NOTE: THE "CH3" ICON WILL NOT BE VISIBLE
~.r-'
WHEN THE CONTROLLER IS SET FOR "ALARM
ONLY" UNDER THE "SYSTEM TYPE" SETTING.
II