Omega ECHO TOUCH Operation And Installation Manual page 10

Using The ECHO-TOUCH Controller (cont'd)
CHANNEL 4 (IF EQUIPPED): Press and release the "CH4" icon using the
same method as with your original controller (i.e., 1 or 2 presses, etc).
• YOUR SYSTEM SHOULD REACT THE SAME AS
WITH YOUR ORIGINAL CONTROLLER.
----.,,-.. NOTE: THE "CH3" ICON WILL NOT BE VISIBLE
WHEN THE CONTROLLER IS SET FOR "ALARM
ONLY" UNDER THE "SYSTEM TYPE" SETTING.
CHANNEL 5 (IF EQUIPPED): Press and release the "CH5" icon using the
same method as with your original controller (i.e., 1 or 2 presses, etc).
II
• YOUR SYSTEM SHOULD REACT THE SAME AS
WITH YOUR ORIGINAL CONTROLLER.
NOTE: THE "CH3" ICON WILL NOT BE VISIBLE
WHEN THE CONTROLLER IS SET FOR "ALARM
ONLY" UNDER THE "SYSTEM TYPE" SETTING.