Omega ECHO TOUCH Operation And Installation Manual page 8

Using The ECHO-TOUCH Controller (cont'd)
TRUNK RELEASE / CHANNEL 2: Press the and hold the ''TRUNK'' icon for 3
seconds.
• YOUR SYSTEM SHOULD REACT THE SAME AS
WITH YOUR ORIGINAL CONTROLLER.
• UPON RECEIVING CONFIRMATION FROM YOUR
SYSTEM, IT WILL PLAY THE TRUNK RELEASE ANIMA-
TION AND VOICE ALERT
II
START (GEN 1/GEN 2 REMOTE START}: Press and release the
u*"
icon us-
ing the same method as with the original controller (i.e., 1 or 2 presses, etc).
• YOUR SYSTEM SHOULD REACT THE SAME AS
WITH YOUR ORIGINAL CONTROLLER.
• UPON RECEIVING CONFIRMATION FROM YOUR
SYSTEM, IT WILL PLAY THE REMOTE START ANIMA-
TION, AND PLAY THE REMOTE START ON/OFF VOICE
ALERT.
• THE CLOCK WILL CHANGE TO 0:00 TO START THE
REMOTE START TIMER. IT WILL TIME HOW LONG
THE ENGINE RUNS IN MINUTES & HOURS.