After Machine Use; Pushing/Towing The Machine; Machine Long Inactivity; First Period Of Use - Alto FLOORTEC R 570 B User Manual

ENGLISH

AFTER MACHINE USE

After working, before leaving the machine, perform the following procedures.
1. Lift the side brooms with the lever (85).
2. Lift the main broom with the lever (86).
3. Turn on the fi lter shaker with the switch (79).
4. Empty the hopper (17) (see the procedure in the previous paragraph).
5. Remove the ignition key (72).
6. Engage the parking brake by pressing the pedal (3) and engaging the lever (4).

PUSHING/TOWING THE MACHINE

To push/tow the machine when it is turned off, no special prearrangement is necessary.

MACHINE LONG INACTIVITY

If the machine is not going to be used for more than 30 days, proceed as follows:
1. Check that the machine storage area is dry and clean.
2. Disconnect the battery connector (46).
3. Slightly lift the machine so that the skirts, the main broom and the wheels do not touch the ground.
4. If the optional battery charger (47) is installed, disconnect the positive terminal (+) directly from the battery pole (+).

FIRST PERIOD OF USE

After the fi rst 8 hours perform the following procedures:
– Check the fastening and connecting parts for proper tightening.
– Check the visible parts for integrity and leakages.
16
USER MANUAL
FLOORTEC R 570 B 146 2725 000(2)2007-02 A