Memory; Memory Card Reader; Modem - Gateway 400 Notebook User Manual

Memory

You see a "Memory error" message
Make sure that the memory modules are inserted correctly in the memory
bay slots. For more information, see "Adding or replacing memory" on
page 227.
Use PC Doctor or a third-party diagnostic program to help determine if a
memory module is failing. For more information, see "Adding or replacing
memory" on page 227.
You see a "Not enough memory" error message
Close all programs, then restart your notebook.
Help and
Support

Memory card reader

Drive letters for the memory card slots do not appear in the My
Computer window
Reboot your notebook.

Modem

Your modem does not dial or does not connect
Make sure that the modem cable is plugged into the modem jack and not
the Ethernet network jack. See "Back" on page 6 and to make sure that
the connections have been made correctly.
Make sure that your notebook is connected to the telephone line and the
telephone line has a dial tone.
Make sure that the modem cable is less than 6 feet (1.8 meters) long.
Remove any line splitters or surge protectors from your telephone line,
then check for a dial tone by plugging a working telephone into the
telephone wall jack.
For more information about troubleshooting memory errors
in Windows XP, click Start, then click Help and Support.
Type the keyword memory error in the HelpSpot Search
box
www.gateway.com
, then click the arrow.
Troubleshooting
249