Audio Mode; Connecting A Bluetooth Audio Player - Toyota Prius 2012 User Manual

1. AUDIO SYSTEM OPERATION
CAUTION
●
FCC WARNING: Changes or modifica-
tions not expressly approved by the
party responsible for compliance could
void the user's authority to operate the
equipment.
●
CAUTION: Radio Frequency Radiation
Exposure
This equipment complies with FCC radi-
ation exposure limits set forth for uncon-
trolled equipment and meets the FCC
radio frequency (RF) Exposure Guide-
lines in Supplement C to OET65 and
RSS-102 of the IC radio frequency (RF)
Exposure rules. This equipment has
very low levels of RF energy that it
deemed to comply without maximum
permissive exposure evaluation (MPE).
But it is desirable that it should be
installed and operated with at least 20
cm and more between the radiator and
person's body (excluding extremities:
hands, wrists, feet and ankles).
●
Co-location: This transmitter must not be
co-located or operated in conjunction
with any other antenna or transmitter.
SWITCHING TO Bluetooth

AUDIO MODE

1
Press the "AUDIO" button.
The audio system turns on in the last
mode used.
50
2
Touch "Source" or press "AUDIO"
button to display the audio source se-
lection screen.
3
Touch "BT" on the screen.
If a desired source is not displayed on the
screen, touch
it.
CONNECTING A Bluetooth
®
AUDIO PLAYER
To use the Bluetooth
you need to register your portable au-
dio player into the system. Once you
have registered it, you can enjoy your
music on the vehicle's audio system.
WHEN A Bluetooth
NOT REGISTERED
If you have not yet registered any
Bluetooth
register it according to the following
procedure.
or
®
audio system,
®
DEVICE IS
®
device, you must first
to scroll to
®