Voice Command System Operation - Toyota Prius 2012 User Manual

INFORMATION
●
Wait for the confirmation beep before
speaking a command.
●
Voice commands may not be recognized
if:
• Spoken too quickly.
• Spoken at a low or high volume.
• The windows are open.
• Passengers are talking while voice
commands are spoken.
• The air conditioning speed is set high.
• The air conditioning vents are turned
towards the microphone.
●
In the following conditions, the system
may not recognize the command prop-
erly and using voice commands may not
be possible:
• The command is incorrect or unclear.
Note that certain words, accents or
speech patterns may be difficult for the
system to recognize.
• There is excessive background noise,
such as wind noise.

1. VOICE COMMAND SYSTEM OPERATION

VOICE COMMAND SYSTEM
OPERATION
1
Press the talk switch.
The voice command system is acti-
vated, press the talk switch to skip the
current dialog state.
In case of an activated speech recog-
nizer waiting for input, press the talk
switch to restart the speech recognizer.
2
After a beep sounds, say the desired
command or touch the desired com-
mand.
: The icon will be displayed if the user
can speak a command.
: Touch to adjust the volume of the
voice guidance volume.
6
187