Touch Screen Operation - Toyota Prius 2012 User Manual

1. CONTROLS AND FEATURES

3. TOUCH SCREEN OPERATION

This system is operated mainly by the
screen buttons.
To prevent damage to the screen, lightly
touch the screen buttons with your finger.
When a screen button is touched, a beep
sounds. (To set a beep sound, see page
93.)
Do not use objects other than your finger
to touch the screen.
NOTICE
●
To prevent the 12-volt battery from being
discharged, do not leave the system on
longer than necessary when the engine
is not running.
INFORMATION
●
If the system does not respond to a
touch on a screen button, move your fin-
ger away from the screen and then
touch it again.
●
Dimmed screen buttons cannot be oper-
ated.
●
Wipe off fingerprints using a glass clean-
ing cloth. Do not use chemical cleaners
to clean the touch screen.
●
The displayed image may become
darker and moving images may be
slightly distorted when the display is
cold.
●
Under extremely cold conditions, the
screen may not be displayed and the
data input by a user may be deleted.
Also, the screen buttons may be harder
than usual to depress.
●
When you look at the screen through
polarized material such as polarized
sunglasses, the screen may be dark and
hard to see. If so, look at the screen
from different angles, adjust the screen
settings (See "DISPLAY SETTINGS" on
page 96.), or take off your sunglasses.
1
11