Scanning A Label; Figure 2-6 Scanning A Label - Intermec 700 Series User Manual

SECTION 2 Operation

Scanning a Label

You can scan a barcode by pressing the yellow scanner
buttons on either the left or the right side of your mobile
computer. The scanning LED will light up green and your
mobile computer beeps following a good scan. The scanner
buttons also "resume" your mobile computer from a sleep
mode.
To gain the best results from the optional integrated
scanner, position the lens so it is horizontal with the
barcode.
RIGHT WRONG
012345
012345
Figure 2-6
Scanning a label
More information regarding configuring your scanner is
available in the 700 Series WinCE Tech Reference p/n
978-054-012.
700 Series Mobile Computer User's Guide 2-9