Connecting Your Tv - Sony MHC-ECL7D Operating Instructions Manual

Connecting your TV

Connect the video input jack of your
TV to the VIDEO OUT jack on the unit,
using the supplied video cord.
When connecting a video deck
Connect the TV and the video deck using
video and audio cords (not supplied) as
shown below.
Video deck
Do not connect directly.
If you connect a video deck between this
system and the TV, you may experience
video leakage when watching the video
signal from this system. Do not connect a
video deck between this system and TV.
12
GB
TV
Unit
Manufacturer's code numbers for
non-Sony TVs
This system supports the following TV
manufacturers. Make sure to set the
corresponding manufacturer's code
number.
1
Press / to turn on the
system.
2
Press and hold SHIFT, then
press the number buttons to
enter a manufacturer's code
number while holding down
TV /.
If more than one code number is
listed, try entering them one at a
time until you find the one that
works with your TV.
Manufacturer
SONY
HITACHI
LG/GOLDSTAR
NEC
PHILIPS
TOSHIBA
RCA
PIONEER
PANASONIC
SHARP
SAMSUNG
JVC
Code number
01 (default)
02, 24
04, 76
04
06, 08, 21, 72
07, 38
10
16
17, 19, 49
18, 29
20, 71
33