Connecting A Tv/Dvd Player - Sony game sync lbt-xg900av Operating Instructions Manual

Connecting a TV/DVD
player
To the video
output of your
DVD player
To the woofer
output of your
DVD player
To
See the picture from the
connected components
Listen to the
connected DVD
player
GB
28
To the video To the front
input jack of outputs of your
your TV DVD player
To the center
To the rear
output of your
outputs of your
DVD player
DVD player
DVD5.1CH
Do This
Connect the video input
jack of your TV to the
VIDEO OUT jack with the
video connecting cable (not
supplied).
When your DVD player has
5.1CH analog outputs:
Press DVD5.1CH so the
indicator of the button
lights up.
When your DVD player has
stereo analog outputs:
Press DVD5.1CH
repeatedly so the indicator
of the button goes off. At
this moment, the DVD (for
2channel) function is
selected.
When using a TV
Turn on the TV and select the video input to
watch the pictures from this system.
You can control Sony TVs using the buttons
below.
TV/
VIDEO
By pressing
You can
TV ?/1
Turn on or off the TV
TV/VIDEO Select the input source for the TV
TV VOL +/– Adjust the volume of the TV
TV CH +/– Change the channel of the TV
Notes
•Be sure to match the color of the plugs and the
connectors.
•Depending on the TV, you may not be able to
control your TV or to use some buttons above.
• Each time you press DVD 5.1CH, the function
changes as follows:
DVD 5.1CH y
(indicator on)
• You cannot enjoy the 5.1 channel surround sound
if you connect a DVD player which does not have
the 5.1 channel analog outputs.
TV ?/1
TV CH +/–
TV VOL +/–
DVD (2 channel)
(indicator off)