Initially the system shows all zones as 'Loc.
not Entered'. The zone number can be selected
using the arrow keys, which has to be changed or
entered, press the 'enter' key. Then it goes to edit
mode, after entering or changed the location
press 'Enter' key for the conformation. The
Maximum 40 characters can be entered in 20
characters per line. Then press'*' key to come
back from the location program menu. And for
entering another location do same steps as
mentioned above.
NOTE: To type an alphabet or numerical in a
character use the concerned alphabet mention
key as many times to get the required alpha
numeric.
letters use 'menu' key. Special characters are
available with '0' (' ', '.', ',') and '9' ('-') keys.
4.2.1.3.3. Password:
By selecting the number 3 from the settings
screen, system enters in the password change
mode. The Display shows as follows.
To toggle between small and capital
1.
User Password
2. Admin Password
44
RE / DD / UM / 2508 V1.2- 01